| 학술지명 |
논문명 |
국내/국외 |
년도 |
분류 |
| Metallurgical and materials transactions A |
Effect do different chromium additions on themicrostructure and mechanical properties of multipass weld joint of duplex stainless steel |
국외 |
2012 |
SCI |
| KOREAN JOURNAL OF METALS AND MATERIALS |
A study on the Mechanical Properties of Duplex Stainless Steel Weldment According to Mo Contents |
국내 |
2012 |
SCIE |
| Metallurgical and materials transactions A |
Influence of sigma phase on pitting resistance depending on solidification mode in AISI 316L weld metal |
국외 |
2011 |
SCI |
| ELECTRONIC MATERIALS LETTERS |
Heteroepitaxial Growth of GaN on Various Powder Compounds (AlN, LaN, TiN, NbN, ZrN, ZrB2, VN, BeO) by Hydride Vapor Phase Epitaxy |
국내 |
2011 |
SCIE |
| METALS AND MATERIALS INTERNATIONAL |
Kinetics of Cr/Mo-rich precipitates formation for 25Cr-6.9Ni-3.8Mo-0.3N super duplex stainless steel |
국내 |
2011 |
SCI |
| KOREAN JOURNAL OF METALS AND MATERIALS |
자동차 배기계용 AISI 409L 페라이트계 스테인리스강 용접부 물성에 관한 연구 |
국내 |
2011 |
SCIE |
| Metals and materials international |
Microstructure and hardness change in high temperature service depending on Mo content 2.25Cr-1Mo steel weld metals |
국내 |
2011 |
SCI |
| KOREAN JOURNAL OF METALS AND MATERIALS |
Effects of Driving Force and Surfactant on the Formation of Ag Powders |
국내 |
2011 |
SCIE |
| International journal of ocean system engineering |
A study on the simulation of water cooling process for the prediction of plate deformation due to line heating |
국내 |
2011 |
|
| Journal of electrochemical society |
Microstructure and Pattern Size Dependence of Copper Corrosion in Submicron-Scale Features |
국외 |
2011 |
SCI |
| Metals and materials international |
Influences of Cr/Ni equivalent ratios of filler wires on pitting corrosion and ductility-dip cracking of AISI 316L weld metals |
국내 |
2011 |
SCI |
| MATERIALS DESIGN |
Effect of Cr/Ni equivalent ratio on ductility-dip cracking in AISI 316L weld metals |
국외 |
2011 |
SCI |
| MATERIALS DESIGN |
The effect of sigma phases formation depending on Cr/Ni equivalent ratio in AISI 316L weldments |
국외 |
2011 |
SCI |
| METALS AND MATERIALS INTERNATIONAL |
High temperature gas nitriding and tempering in 17Cr-1Ni-0.5C-0.4V steel |
국내 |
2011 |
SCI |
| 대한금속 재료학회지 |
Evaluations of microstructure and electrochemical anodic polarization of AISI 304L and 316L stainless steel weld metals with Creq/Nieq ratio |
국내 |
2011 |
SCIE |
| Metals and materials international |
Contribution of precipitate on migrated grain boundaries to ductility-dip cracking in alloy 625 weld joint |
국내 |
2011 |
SCI |
| MATERIALS & DESIGN |
Pitting corrosion behavior on crack property in AISI 304L weld metals with varying Cr/Ni equivalent ratio |
국외 |
2011 |
SCIE |
| MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
The dependence of crack properties on the Cr/Ni equivalent ratio in AISI 304L austenitic stainless steel weld metals |
국외 |
2011 |
SCI |
| MATERIALS & DESIGN |
A study on high temperature gas nitriding and tempering heat treatment in 17Cr-1Ni-0.5C |
국외 |
2011 |
SCIE |
| METALS AND MATERIALS INTERNATIONAL |
The characteristics of high temperature gas nitriding heat treatment and tempering in 0.8Mo added 17Cr-1Ni-0.5C |
국외 |
2011 |
SCI |
| JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS |
Effect of Subzero Treatment on the Damping Capacity of Austempered Ductile Cast Iron |
국내 |
2011 |
SCIE |
| JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS |
A Study on the High Temperature Gas Nitriding Heat Treatment of STS 347 and STS 310S Austenitic Stainless Steel |
국내 |
2011 |
SCIE |
| 열처리공학회지 |
STS 431 마르텐사이트계 스테인리스강의 고온 가스질화 열처리에 따른 상변화 |
국내 |
2011 |
|
| MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
Phase changes of the AISI 430 ferritic stainless steels after high-temperature gas nitriding and tempering heat treatment |
국외 |
2011 |
SCI |
| 열처리공학회지 |
Nb 이 첨가된 STS 444 페라이트계 스테인리스강의 고온질화 열처리시 조직변화 |
국내 |
2011 |
|
| 열처리공학회지 |
오스테나이트계 스테인리스강의 고온질화에 따른 조직변화 |
국내 |
2011 |
|
| 열처리공학회지 |
DEFORM™을 이용한 SKH9고속도공구강의 경도 예측 |
국내 |
2011 |
|
| JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
Effect of boron contents on weldability in high strength steel |
국내 |
2011 |
|
| 한국재료학회지 |
가공용 알루미늄 합금의 극저온 특성 |
국내 |
2011 |
|
| 열처리공학회지 |
질소침투 열처리한 STS 410 및 410L 마르텐사이트계 스테인리스강의 템퍼링에 의한 조직변화 |
국내 |
2011 |
|
| JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
Effects of initial condition of steel plate on welding deforniation and residual stress due to welding |
국내 |
2011 |
SCIE |
Metals and meterials intersection A |
Microstructure and hardness change on hugh temperature service depending on Mo content 2.25Cr-1Mo steel weld metal |
국외 |
2011 |
SCI |
Metal and Materials International |
Influence of Cr/Ni equivalent ratios of filler wires on pitting corrosion and ductility-dip cracking of AISI 316L weld metals |
국내 |
2011 |
SCI |
Materials & design |
The effect of sigma phases formation depending on Cr/Ni equivalent ratio in AISI 316L weldments |
국외 |
2011 |
SCI |
Materials & design |
The effect of sigma phases formation depending on Cr/Ni equivalent ratio in AISI 316L weldments |
국외 |
2011 |
SCI |
Metal and Materials International |
Evaluations of microstructure and eletrochemical anodic polarization of AISI304L and 316L stainless steel weld metals with Creq/Nieq ratio |
국내 |
2010 |
SCI |
Metal and Materials International |
Contribution of Precipitate on Migrated Grain Boundary to Ductility-dip Cracking in Alloy 625 Weld Joints |
국내 |
2010 |
SCI |
Metal and Materials International |
Contribution of Precipitate on Migrated Grain Boundary to Ductility-dip Cracking in Alloy 625 Weld Joints |
국내 |
2010 |
SCI |
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
저서및논문(최근 5년간 SCI논문)